Measuring Guide
Easy steps for accurate window measurements.
Get the Perfect Fit
Accurate measurements are crucial for a correct fit and effective blackout. Use this guide to measure your windows carefully and avoid common mistakes.
We’re here to help with any questions or assistance you need. Email us at support@guardblinds.com .
Let's Start
What you will need
Steel Tape Measure
Pen and paper to record your measurements
A friend to assist you
Three steps to measure for Guard
1
Step 1: Measuring Your Window’s Recess Depth
Before you measure the width and height of your window, it’s important to check the recess depth to ensure there’s enough space for the Guard to fit inside.
-
Minimum recess depth required: 1.3 inches (3.3 cm) for proper installation.
-
How to measure: Start at the front edge of the window recess (the part farthest from the window) and measure to the shallowest point within the recess.
Watch for Obstructions
Common obstructions within your recess space include:
Window handles
Latches
Locks
Winders or cranks
Measuring with Obstructions
Even if your window recess is deep, obstructions can prevent the blinds from closing properly. To ensure everything fits:
1. Measure the recess depth from the front of the recess to the window.
2. Measure the obstruction depth from the front of the window to the front of the obstruction (e.g., a handle).
3. Subtract the obstruction depth from the recess depth to find your unobstructed recess space.
Important: You need at least 1.3 inches (3.3 cm) of unobstructed recess space to install Guard securely.
Step 2: Measuring the Width
Since windows are often not perfectly square, you need to measure the width in three different places to account for any unevenness:
-
Top of the window recess
-
Middle of the window recess
-
Bottom of the window recess
Record the smallest of these three measurements. This ensures your Guard fits the narrowest point of your window.
2
3
Step 3: Measuring the Height
Next, measure the height of your window recess. Once again take measurements from three locations:
-
Left of the window recess
-
Middle of the window recess
-
Right of the window recess
Just like with the width, record the smallest of these three measurements.
Avoid Common Measuring Mistakes
To get the most accurate measurements, avoid these common errors:
-
Measuring at an angle: Always hold the tape measure straight and level.
-
Bending the tape measure: Keep the tape straight to ensure accurate measurements.
-
Rounding incorrectly: Round to the nearest sixteenth of an inch (tenth of a centimeter) if needed.
Final Tips for Accurate Measurement
-
Be precise: Use exact measurements, if needed round to the nearest sixteenth of an inch (tenth of a centimeter). This ensures the best fit.
-
Allow us to make the deductions: Provide the exact width and height, and we’ll make any necessary adjustments during manufacturing.
-
Measure at the front of the recess: This is the area where the Guard will be installed, so it’s crucial to measure accurately at this depth.
What If I Make a Mistake?
If you think you’ve made an error while measuring, contact us immediately at support@guardblinds.com , and we’ll work with you to correct the measurements before your Guard goes into production.
FAQs
Guard features a unique track system that eliminates gaps between the blinds and the window frame to ensure total darkness. The dual-layered honeycomb fabric combines non-woven polyester with a reflective thermal barrier to block light, insulate against heat, and reduce noise.
Guard is designed to fit most standard window types, but there are a few considerations.
Guard won't fit windows that are not square. Additionally, the blinds require at least 1.3 inches of unobstructed recess space for proper installation. If your window doesn't meet these criteria, Guard may not be suitable for you.
Here's a list of compatible and incompatible window types to help you determine if our product is the right fit for your home:
European Windows
Tilt-and-Turn Windows
Fixed Windows
Sliding Windows
Casement Windows
Hung Windows
Sash Windows
Bay Windows
Awning Windows
Skylights
Arched windows
To ensure correct measurements, please read our Measuring Guide. It's important that your measurements are accurate and precise, as they are crucial for the blinds to fit properly. Incorrect measurements will result in the blinds not fitting your windows.
Guard is low-maintenance. The non-woven polyester fabric resists dust and stains, requiring only occasional cleaning with a damp cloth. No special cleaners or treatments are necessary.
Yes, our Bits are safe for sensitive teeth. We use Nano-hydroxyapatite in our Fluoride-Free formula, a mineral that's been proven to strengthen and remineralize enamel and help fight sensitivity.
Read the nHAP Study here and read more information about it here.
We also recommend talking to your dentist about Nano-hydroxyapatite or when making any changes to your oral care routine.
The exterior and interior of the Guard are the same color, based on your fabric choice. If you select Graphite, both sides of the blind will be Graphite; if you choose Quartz, both sides will be Quartz. This uniform design maintains a cohesive look from both inside and outside your home.
To install Guard, follow our step-by-step instructions in our Installation Guide.
To place an order for Guard, please follow these steps:
-
Select a Color Combination:
Choose from the four available color options for both the frame and the fabric to find the combination that best suits your space.
-
Choose Size Ranges:
Width Range: Select the range that your window's width falls into. This is a general range, not the exact measurement. Height Range: Select the range that your window's height falls into.
-
Enter Exact Measurements:
Input your window's exact width and height measurements in inches and sixteenths. This ensures a precise fit for your custom blinds.
-
Add the Product to Cart: Once you've selected your options and entered your measurements, click the "Add to Cart" button. The cart drawer will open, allowing you to review your selection.
-
Proceed to Checkout:
Click on the "Checkout" button. You will be redirected to the checkout page where you can review your order and complete the payment process.
If you need assistance at any point during the ordering process, feel free to contact our customer support team at support@guardblinds.com .
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer nec odio. Praesent libero. Sed cursus ante dapibus diam. Sed nisi. Nulla quis sem at nibh elementum imperdiet.
Ready to Order?
With your measurements complete, you're now ready to order Guard with a perfect fit and total blackout.
Order Now
